tactile

Beloved by the community, the Zaku linear switch has come to be one of the most sought after linear switches on the market today. To expand upon that line-up, Bolsa Supply has brought in the Zaku II tactile switch to fill in the void. The Zaku II colourway follows the more widely recognized, and appropriately named, Zaku II gunpla.

The switches boast medium tactility with a sharp, P-shaped tactile bump at the top of the keypress. The material components match the Zaku linear switch directly, with a longpole POM stem, PC top housing, and Nylon bottom housing with a 63.5g double-extension spring.

Canada: You are here!
USA: Bolsa Keyboard Supply

CIRCLE – TRIANGLE – SQUARE.

KNC Keys’ first Jacket switch has been remade! Red Jacket 2.0 Linear Switches feature UC Nylon housing, a long 13.5mm HPE stem for a super smooth stock feel and clean, clacky sound. Similar to the Green Jacket switches, Red Jacket 2.0 switches feature a double-stage spring, with a lighter actuation weight of 52g and bottom out weight of 60g and 3.5mm of travel distance.

Emogogo Tactile Switches are one half of JWK’s new switch line featuring proprietary switch moulds and plastic blends exclusive to Emogogo. They feature a medium-high tactile bump thanks to their long-pole tactile stem, as well as 22mm, 62g progressive springs that give a bit of pre-travel before a rounded D-shaped bump and a quick return on the keypress. The proprietary moulds and plastic blends used in the housing result in a need for minimal factory lube to produce a fantastic, smooth stock switch feel.

Photos taken by the amazingly talented Karan Chauhan!

Following the massive success of the Zaku linear switches, Bolsa Supply wanted to take things a little farther and have certainly done so! In collaboration with Tecsee, Bolsa has designed a proprietary stem unique to the Corsa switches, landing them in the light to medium tactility range inspired by MX Clears. Modern touches have been added, such as a longpole stem for that snappy feel and sound, and a lighter 60g slow spring to soften the tactility and still maintain a noticeable bump.

Photos taken by the wonderful Sterling Photography!

CIRCLE – TRIANGLE – SQUARE.

KNC Keys has released another Jacket-themed switch, this time the Green Jacket linear switches! These phenomenal switches feature HPE top housing, Nylon bottom housing, and an extra long 13.9mm POM stem for a super smooth stock feel and clean, clacky sound. The 63.5g double-stage spring will keep the switches feeling super snappy, especially on the upstroke, and no factory lube means that if you feel like you want to make the Green Jackets a little more to your liking you can do so with ease!

Also available are the tactile variant of the Green Jacket switches! They have little to no pre-travel and once over the bump you’ll nearly be bottoming-out. All of the specs are identical to the linear variant.

Attempting to match the colour of the switch housing to the show the switches are inspired from was quite a challenge but they came out just perfect. They’re incredibly vibrant and will look amazing in your board and in a container waiting for the right time to be used!

The Fruit switch line has another fantastic entry with the Kiwi tactile switch! At 67g stock spring weight measured at bottom-out, the stock press has a prominent “p-bump”, with the tactile bump towards the top with a more linear press afterwards. Kiwis have the same chemical composition in the housing and stem as the V2 Tangerines, so the stock smoothness with light factory oil lubing is a fine choice for beginners into the hobby, and as the factory lube isn’t over done, it’s very easy to clean and re-do.

The switches work great with all types of switch lubricant we have available, with our personal favourite being 205g0. While it may slightly affect the tactility when properly applied, the smoothness is phenomenal and you’ll still have a satisfying, poppy tactile switch.

Photos taken by the amazingly talented Karan Chauhan!

Our first offering from SP Star come the SP Star Magic Girl switches! Designed to match Mintlodica‘s DSA Magic Girl keycap set, these tactile switches have a 67g bottom-out, nylon housing with a POM stem, and a more subdued medium tactile bump compared to Kiwis, T1s, etc. The stem pole has tapered slide rails, with each side being lightly lubed by the factory, slightly different to the typical oil on legs seen from other manufacturers’ factory lubing. This, combined with the materials used in the housing, result in a quieter press than other tactile switches in the same feel range, and thus may prove more beneficial for office settings!

We couldn’t be more excited to announce one of two parts of our first switch collection release: the Amethyst tactile switch! They feature two of the colours from our logo, and the housing shares the same colouring as its namesake gem. The Amethyst switches feature a long stem pole which makes for a satisfying, clacky bottom-out, and the double-extension spring allows for a snappy stem return!

Photos taken by the wonderful Sterling & Co. Photography!

Stock

Canada/USA: You are here!
USA: Bolsa Keyboard Supply
EU/UK: Salvun
SEA: Zion Studios

From 43 Studio comes the second iteration of the Rara switch, one of the first JWK tactile switches to hit the Western market! First ran on Drop at the start of last year, this run was previously entrusted to us and a selection of other regional vendors! One of the major improvements over the previous version is the reduction of housing wobble, which is prevalent in JWK switches. The housing material has changed slightly, with adding a polycarbonate top instead of nylon for a smoother experience. It comes stock with ThicThock DL springs, as well as shipping with his own designed PVC films on a sheet.

To help answer some potentially common questions, I will list my experiences with the V1 Rara switches that I have. They are a medium-light tactile switch, in the realm of Ergo Clears with a b-bump that begins shortly after the initial keystroke. They are quieter on the upstroke than other tactiles that they’re compared to, such as T1s and Koalas, though with the change to a PC top it will most likely be a bit clackier. I personally really enjoy them, and think you will too!

The Naevy switch project has been years of continual research and development into tactile switches. The tactile switch market was been stagant and without any innovation and required acquisition of multiple switches to be put together – increasing over cost, plastic waste and effort.

The aim of the Naevy switch is to create a new type of tactile – affordable and good as a stock switch. The stem is an original mold owned by AEBoards and it uses a panda derivative housing (most commonly used for tactile switch modding). All funding was paid for by AEBoards without any GB money involved – they shouldered the risk on the project because they believe in what they’re providing to the community.

For the Raeds, they’ve taken what they like about the Naevies and put that into a linear version. It includes the same materials, but with a custom stem mould that is longer and smoother than the average linear.

TTC Bluish White switches are a real sleeper hit of a tactile switch! The name of the switches isn’t particularly creative, yet the specifications are where it really shines. The first notable feature is the dust-proof stem, as seen on Kangaroo Inks and Gateron Yellow Inks, which simply aims to reduce the chance of dust falling into the switch itself and affecting performance. The other two most notable features are the double-coiled spring and the muted bottom-out.

The double-coiled spring results in an extremely satisfying press and return combined with the light spring weight (42g actuation), the top-out being described as “punchy”. There’s also a small silicone plug at the bottom of the center tube of the bottom housing which allows for the bottom-out to be muted as the stem pole makes impact, but the top-out is louder by comparison as a result.

The switch shines whether it’s stock or lubed, and if you’re really interested in trying to create a new silent switch, try lubing the top housing and see how it turns out!