switch

Our first offering from SP Star come the SP Star Magic Girl switches! Designed to match Mintlodica‘s DSA Magic Girl keycap set, these tactile switches have a 67g bottom-out, nylon housing with a POM stem, and a more subdued medium tactile bump compared to Kiwis, T1s, etc. The stem pole has tapered slide rails, with each side being lightly lubed by the factory, slightly different to the typical oil on legs seen from other manufacturers’ factory lubing. This, combined with the materials used in the housing, result in a quieter press than other tactile switches in the same feel range, and thus may prove more beneficial for office settings!

Gateron Black Ink V2 linear switches are one of the community’s most favoured switches to date, seeing use in an enormous number of builds from the average enthusiast up to professional streamers and e-sports competitors. They sport a proprietary plastic mix not seen before in Gateron’s switches, which has helped the switch become well-known for its stock smoothness and bassy accoustics. They also have matching black springs, which have little spring ping on stock Ink switches.

Lubed, Black Ink V2s are pretty hard to beat in terms of smoothness and sound; we would recommend Krytox 205g0 on the housing and stem, with GPL 105 or GPL 106 on the springs. The Ink housing is also incredibly tight, and have found that 0.125mm TX films are some of the few types of films that will fit.

Photos taken by the wonderful Sterling & Co. Photography!

Gateron CJ switches, the newest switch from the manufacturer as of September 2021, are a great linear switch that have a smooth, satisying keypress and will certainly satisfy clacky linear lovers. While all-POM switches tend to run into issues of feeling leathery, Gateron’s proprietary Ink housing plastic is used effectively in the top housing to allow for a smooth actuation and to round out the clacky sound. With a 50g actuation and 60g bottom-out, you won’t need to worry about fatigue using these in a daily driver.

While Gateron CJ switches are just fine stock, they do benefit from being lubed, though any lube of choice is satisfactory. With most linear switches, we recommend Krytox 205g0 on the housing and stem, and GPL 105 or GPL 106 on the springs. Depending on the type of lube used, the acoustics will deepen slightly, so if you’re not a fan of the sound being quite as clacky, then going with a thicker lube may be the way to go!

Photos taken by the wonderful Captain.Sterling!

PangHu’s Giant switch series has seen numerous material changes to its components, and now they’ve changed manufacutrer from Gateron to Tecsee! The Giant V5 linear switches continue the frosty aesthetic with a matching light blue UHMWPE stem and Nylon bottom housing, and milky UHMWPE top – boasting a super smooth linear keypress all the way through. The UHMWPE top gives the Giant V5s a satisfying, bassy upstroke so all of the thock enthusiasts will enjoy these switches!

Photos taken by the wonderful Captain.Sterling!

In collaboration ElBoard’s DMK Gift keycap set, PangHu has designed the Gift linear switch! Sharing similar components of the Giant V5 linear switches, both using an UHMWPE stem and Nylon bottom housing, the Gift switches have a smooth keypress from start to finish. The differing factor is in their acoustics, as the PME top housing in the Gift switches aid in providing a clackier upstroke.

Photos taken by the wonderful Captain.Sterling!

This is Prevails’ new Epsilon linear switch manufactured by JWK! This switch features a bright orange color, full nylon housing, JWK’s P3 stem (same stem from their Durock POM linear switches), and a 68g gold-plated progressive spring.

With the JWK produced full nylon housing, mystery material stem from their POM linear switches, and progressive spring, this switch will have not only a nice, smooth, bouncy feeling when typing it also has a very pleasing sound signature.

Check out the reviews and sound tests below!

Shoobs

Tech Kile

Gateron Oil King linear switches are a phenomenal addition to Gateron’s switch repertoire – offering a super smooth, thocky keypress with consistently applied factory lube to help avoid spring ping and unnecessary friction. Similar to the Gateron CJ switches, the Oil Kings implement the proprietary Ink housing material blend, but this time for the bottom housing. The top housing is instead using a PA66 Nylon plastic, which, in conjunction with the POM stem, results in an impressively smooth keypress from actuation to upstroke. The stem tolerances in the top housing are also fantastic, with only a very slight amount of wobble, which isn’t necessarily a bad thing as it can help prevent possible stem binding on the top housing on the upstroke.

Gateron has also been experimenting with different spring lengths, and the Oil Kings feature a matching 20mm black spring allowing for the light actuation and heavy bottom-out weights.

For those that prefer to be able to buy switches, install them straight into their board, and type on will be more than satisfied with Gateron Oil Kings!

Photos taken by the wonderful Captain.Sterling!

Adding to our TTC switch line are the TTC Ace linear switches! These linear switches boast an impressively smooth stock typing experience with factory lube on the legs and side parts of the stem, and this great switch feel is improved further by the 60g double-extension spring for a snappy return. With minimal stem wobble and no housing wobble, these switches are a real sleeper hit for the quality and price offered!

Photos taken by the wonderful Captain.Sterling!

The third switch in the Ashkeebs line-up, Alexandrite linear switches aim for a smooth stock typing experience and thocky acoustic. Following our previous switch nomenclature, Alexandrite is a stone that appears bluish green in daylight or fluorescent light, and purplish red at night, tying in perfectly with our brand colours!

The UPE stem and HPE top housing combination allow for a nice, smooth keypress, and the Nylon bottom housing gives the switch a solid, thocky bottom-out. These switches are provided with no factory lube for a consistent stock typing experience, however as with lubing most linears, we recommend 205g0 applied to the bottom housing and stem, with GPL 105 or your choice of oil for the springs. This will help to deepen the sound further and guarantee a super smooth keypress.

Photos taken by the amazingly talented Karan Chauhan!

Canada/USA: You are here!
USA: Prevail Key Co
EU: CandyKeys
UK: Protozoa Studio
SEA: Zion Studios
OCE: SwitchKeys

The Fruit switch line has another fantastic entry with the Kiwi tactile switch! At 67g stock spring weight measured at bottom-out, the stock press has a prominent “p-bump”, with the tactile bump towards the top with a more linear press afterwards. Kiwis have the same chemical composition in the housing and stem as the V2 Tangerines, so the stock smoothness with light factory oil lubing is a fine choice for beginners into the hobby, and as the factory lube isn’t over done, it’s very easy to clean and re-do.

The switches work great with all types of switch lubricant we have available, with our personal favourite being 205g0. While it may slightly affect the tactility when properly applied, the smoothness is phenomenal and you’ll still have a satisfying, poppy tactile switch.

Photos taken by the amazingly talented Karan Chauhan!

Ramen.switch V2 goes for a more minimalist design than its predecessor, inspired by the clean aesthetic of blueprints. This deskmat design features the schematics of the Ramen.switch cart, including measurements scaled to the size of the deskmat displayed in millimetres and inches.

Ramen.switch V2 is available in six different colourways, each featuring a white or black background with a single accent colour. White variations are available with accents in black (Quartz), green (Matcha), or pink (Sakura), whereas deskmats with a black base can have accents in white (Carbon), blue (Cobalt), or orange (Tangerine).