Following our trend of loving all things purple, we’ve brought in the luxurious and svelte American Haptics Minimats for you to enjoy! Boasting a compact size featuring four small compartments and one medium work space, building a keyboard has never been more tidy. And with the bright lavender colour it will be nigh-impossible to lose any parts!
American Haptics Minimats are constructed with a super soft, heat-resistant silicone rubber, allowing for worry-free soldering. They are also hand-made in Richmond, Virginia with a high level of quality control and a drive to perfect their product.
Do not cut on the Minimat, otherwise you risk damaging the surface irreversibly.
Following our trend of loving all things purple, we’ve brought in the luxurious and svelte American Haptics Workmats for you to enjoy! Amassing an impressive 62.5cm (24.5in) x 40.5cm (16in) surface area with five small compartments and one large work space, building a keyboard has never been more tidy. And with the bright lavender colour it will be nigh-impossible to lose any parts!
American Haptics Workmats are constructed with a super soft, heat-resistant silicone rubber, allowing for worry-free soldering. They are also hand-made in Richmond, Virginia with a high level of quality control and a drive to perfect their product.
Do not cut on the Workmat, otherwise you risk damaging the surface irreversibly.
Some of you may have seen our Ashkeebs-branded switch bags included with your switch orders, and now they’re available for order en-masse! Designed by EURApsd, the Ashkeebs Switch Bags feature a 3.5mm plastic thickness for durability, as well as a gusseted bottom to allow the bags to stand by themselves easily. Both sides of the bags are carefully designed, with the front sporting our brand colours with frosted slivers to allow switches to peek through and a cute little switch in the corner, and the back with frosted plastic and our logo over top to clearly see everything stored inside!
There are two bundles available: 10 bags for $3 USD | $3.75 CAD, and 20 bags for $5 USD | $6.50 CAD!
Elevate your workflow with the BNK9 Macropad! Crafted from a solid block of CNC-machined aluminum, this sleek macropad features one knob and nine customizable switches.
Effortlessly program each switch using QMK/VIA configurator and enjoy dynamic RGB lighting!
Group Buy Information
As this is a Group Buy there are no refunds available once the GB has closed. Please make sure you consider this before joining. This a pre-order for this keycap set. This set will be manufactured after the GB period. If you join this GB, you’ll receive the set after production is completed in approximately Q1 2024. Please do not add in-stock items, or items from other group buys to this order. All in-stock items added to orders will be cancelled from that order and refunded. Any orders with different group buy projects combined will be cancelled and refunded. By purchasing this product, you are agreeing to these terms.
Sleek, stylish, and available in both silver and copper; the BNR1 V2 is a unique addition to any setup. This all-alu knob connects to your computer via USB-C (cable sold separately), and is based on the popular QMK firmware – making it fully programmable with common apps like VIA!
Paralyzed by choice or just not sure what you might do with an encoder? Try using it for:
- Audio volume
- Scrolling
- Tabbing
- Window movement
- History scrubbing
- Undo or redo
- Scrolling horizontally
- And much more!
The Bongo Box is an acrylic artisan box, inspired by the original meme of the Bongo Cat, available in frosted acrylic and five other colours! There are also two variations available: one in a five-by-five grid for a total of 25 1u artisan keycaps, or one with 21 1u artisan keycap slots, and 2 2.25u artisan keycap slots for Rama Enter keys. All cases will fit SA caps, and the project has been approved by Bongo Cat’s original creator and the creator of the Bongo Box keyboard case!
Available to purchase alongside the Bongo Box artisan case is a clear acrylic stand to proudly display your artisan collection!
Need a new case for your keyboard? Café Aeyoung has you covered with this excellent carrying case, available in two sizes – a Small case that can accommodate 60%/65% boards, and a Large one made to fit a 75%/TKL! Additionally, each Small case comes with an adjustable, detachable shoulder strap in your choice of white or pink!
The exterior of the case’s shell has a dyed spandex cover, making it smoother and softer to the touch, and is accented by custom-moulded zippers with pink hearts on the tag. The interior of the case is roomy, and includes a set of removable foam inserts that help hold its contents firmly in place!
Worried about glasses leaving ring-shaped stains on your desktop? Don’t have enough room to put a drink down on something other than your expensive deskmat? Apprehensive about using cheap cardboard coasters that wear out quickly? The Café Aeyoung coaster solves all these problems and probably some others!
Made from durable multi-layered acrylic and featuring a removable silicone backing that increases grip, this quality coaster reminds you to “have a nice day!” in print and is emblazoned with a cute coffee cup – the logo of Café Aeyoung’s brand.
The acrylic coaster itself is machine-washable, but we recommend that you hand-wash the silicone backing separately as over-exposure to high heat can warp the material.
Captain Sterling has done a lot of work for us over the past few years – he’s responsible for taking many of the beautiful product photos we use for our in-stock items – and we’d like to take this opportunity to congratulate him on reaching 10,000 Instagram followers! In commemoration of this accomplishment, this unique hexagonal artisan keycap is being produced in association with the talented folks at Aiglatson Studio!
Deskeys Gasket Switch Films are here! From the engineer that brought forth the wonderful topre silencing rings comes their foray into the MX switch accessory market, and they have truly hit a home run with these! At a thickness of 0.3mm, the natural compressive nature of the films allows for it to work with a wide variety of switches and creates a deep, thocky sound that many chase after. Just as other switch films, they help to reduce stem and housing wobble by creating a tight seal once the switch has been enclosed with the films applied to the bottom housing.
These are twice the thickness of the standard TX films we carry, but carry the same level of effectiveness with a bass-ier acoustic effect. Below is a comprehensive list of switches we’ve used these films with and have found success:
- Gateron Milky Blacks
- Gateron Milky Yellows
- Cherry Retooled & Vintage Blacks
- FEI Matchas
- NovelKeys Creams
- All ZealPC switches
- TKC x C3 switches (V2 Tangerines, Kiwis, and Banana Splits)
- Holy Pandas (BSUN and first Drop version)
- U4 Bobas
- Keebwerk. Tacits
The only switch that we’ve tried it with that didn’t work very well were Gateron V2 Inks, as it was just too tight. This could be due to the plate having a tight tolerance already, so your mileage may vary.
DMK GHOST is a spooky semi-translucent grey-on-white double-shot keycap set bringing ghastly vibes to your mechanical keyboard.
Designed by Sailer and manufactured by Los Angeles Apparel in South Central L.A., this vintage black T-shirt features Milo the lonely ghost on its left breast, and a spooktacular mosaic on the back!
Check out the keycaps that are being offered as well!
Check out the deskmats that are being offered as well!
Sizing Chart
Durock plate-mount stabilizers are an excellent upgrade from the stock stabilizers provided with a lot of in-stock and entry-level boards, having a more reliable, higher-quality production. Unlike the V2 PCB-Mount Durock stabilizers, the stem legs will need to be clipped as they do not come pre-clipped. We’ve added in the new Piano version of these stabilizers, which come with milky white stems, black housing, and gold-plated wires!
While the stock stabilizers are quite smooth, it is always recommended to lube your stabilizers in order to reduce potential rattle. Recommended lubricants are Krytox 205g0 and SuperLube dielectric grease!
Available in three variants: white, black, and piano!
Durock stabilizers are a screw-in, Cherry-style PCB mount stabilizer. Unlike GMK and Cherry stabilizers, these come pre-clipped and will sit flush to the PCB making the keyboard building process just a bit easier! The V2 stabilizers show an improvement over the previous version by adding a hook at the front of the stabilizer housing where the wire presses into; this helps to prevent wire popping.
While the stock stabilizers are quite smooth, it is always recommended to lube your stabilizers in order to reduce potential rattle. Recommended lubricants are Krytox 205g0 for the housing and SuperLube dielectric grease, or our own Krytox XHT-BDZ grease!
Available in two variants: smoky and clear housing.
Manufactured in Korea, GEON 22mm Triple-Stage Springs are unique, high-quality springs wherein the design of the springs allows for a normal downstroke keypress, but a snappy return compared to linear springs. As with all GEON products, the 22mm Triple-Stage Springs have gone through rigorous quality control to allow for a precise and minimal deviation range on each spring.
GEON Force Break Pads have been designed specifically for the keyboard case modification process of the same name, wherein the pads break the force between the contact point of the top and bottom case. These can be placed over the case screw holes between the top and bottom case. This process helps reduce reverb carrying through the case, improving overall sound significantly in boards experiencing pinging/reverb.
Have you ever had difficulties mounting switches to a plate made of a soft material like polycarb? Keeping a plate from flexing under pressure manually can be awkward, but is easily alleviated with a GEON plate support fork!
The fork is made of injection-moulded POM, 3.4mm thick and plenty sturdy – simply line up the mounting holes, slide the fork between your plate and PCB and clip your switches in hassle-free!
Tired of stabilizer wires that are slightly (or not-so-slightly) bent? It can happen for a lot of reasons – maybe they had a troubled transit, or maybe someone was too indelicate when uninstalling them – but you can bend them back into shape with a pair of GEON stabilizer wire twisters!
The twisters are made of quality black-coated 420J2-grade stainless steel, and are a precision instrument designed to help straighten 1.6mm stabilizer wires. Just insert each end of the wire into one of the included twisters, and twist until they align!
GEON Switch Openers are of a small, simple design able to open MX or Kailh style switches using magnetic attachments to keep the two pieces together. A nicely-designed lip on the front of the switch opener makes separating the pieces a breeze.
If you’re struggling to put keycaps on some of your switches and stabilizers but not others, you’re in luck! The Geon Trimmer is used to calibrate switch, stabilizer, or keycap stems to allow them to fit properly when having fitment issues, either reducing the width of the switch and stabilizer stems or increasing the width inside of the keycap stem.
Use Guide
Switch/Stabilizer,”+” Stem Calibration
- The trimmer can be used in any direction regardless of the direction
- Dimensions change depending on the number of uses by pushing out the stem rather than by cutting it out
- Use it several times for switches and keycaps that are not used as tools that require adaptation
- Work vertically and horizontally with the stem
- The trimmer is a precision tolerance product that is sensitive to impact, so please be careful when using it
Keycap Calibration
- Keep the keycap leveled during calibration
- Do not use it vertically
- If the switch is turned 90 degrees, it must be used vertically
- Remove the burr by cutting the stem
- Please use it vertically with the stem
- The trimmer is a precision tolerance product that is sensitive to impact, so please be careful when using it
HIBI is back to celebrate the Lunar New Year with another seasonal offering! In addition to the new year’s Rabbit design and Good Luck Knot keycap, last year’s Tiger trays are also receiving a second run – just in case you missed out!
These golden trays are made of anodized aluminum with an etched design infilled by multiple colours of enamel, and feature a red silicone base that helps prevent sliding and scratching. The 1u artisan keycap features a design based on the traditional Good Luck Knot and is made of red anodized aluminum, molded to fit in the top row of Cherry profile boards!
From your favourite anime about emotionally troubled teens and bunny girls, comes a set that brings a classy and polished feel. JTK Dreaming Girl provides a whimsical set inspired by the deep night sky and an enchanting pink intensity that even Mai would love. With this set you will simply never want to wake up. Just for you: a set made by weebs, for weebs.
Otakeebs has partnered up with Gateron to provide the Usagi switch and stabilizer sets! The switches feature an UHMWPE stem, Gateron’s proprietary KS8 housing mould, and a PC top, and the stabilizers have Nylon housing and a POM stem. Both have been designed with acoustics and keypress smoothness in mind!
KAM Li’l Dragon accessories & keycap set take inspiration from the exiled dragon-child of the anime series Miss Kobayashi’s Dragon Maid.
Her hair color inspired the top-down cream to purple gradient; her dress, the pink accent color; and her hair beads, the dark blue-grey legends. All colors in this project were selected from the Pantone Uncoated Formula Guide. In order to emulate her character in a typeface, Inverse Design Collective decided to go with all lowercase legends and a rounded sans serif, Proxima Nova Soft, for the Latin Alphas and Chihaya Jun for the Katakana and Hiragana Alphas.
Check out the keycaps that are being offered as well!
Looking for the deskmats? Find them here!
Manufactured in the US by Space Cables, our Lavender Lube Stations are a sturdy, custom-branded, 63-slot 3mm acrylic switch lubing station made to help reduce desk clutter and provide a bright, soft aesthetic to your desk!
Couple one of these lube stations with a 10-pack of our Ashkeebs Switch Bags and you’ll have a lovely, clean work station in no time!
Photos taken by the wonderful Captain.Sterling!
Embrace the edgy intersection of art and anatomy with NERVE apparel. A bold fusion of form and function, these shirts and hoodies feature a stunning graphic of a skeletal structure bathed in vibrant purple and golden hues, symbolizing both the strength and complexity within.
Crafted for comfort with a soft, heavyweight fabric, the hood’s generous hood and spacious pockets provide practicality while maintaining a sleek, urban aesthetic.Vendors
Canada: You are here!
US: LoobedSwitches
EU: Delta Key Co.
KR: Geonworks
AU: Keebz & Cables
TH: Aiglatson Studio
LA: LatamKeys
JP: BaseKeys
TW: Typo!Works
Group Buy Information
As this is a Group Buy there are no refunds available once the GB has closed. Please make sure you consider this before joining. This a group buy for this apparel. These clothes will be manufactured after the GB period. If you join this GB, you’ll receive the apparel after production is completed in approximately Q4 2024. Please do not add in-stock items, or items from other group buys to this order. All in-stock items added to orders will be cancelled from that order and refunded. Any orders with different group buy projects combined will be cancelled and refunded. By purchasing this product, you are agreeing to these terms.
Here are our ongoing deals - Buy two deskmats, get the third free!20% off when combining GMK Night Runner R2 base kit with matching Stellar65!Major discounts on Salvation case & parts!Keychrons & Skyloongs 40% discounted!
