Accessories

These unique Marble Wrist Rests are a great way to bring a classy look to any desk setup out there. This piece of white marble wrist rest is manufactured by a local artisan in Hualien, Taiwan, a city famous for its marble industry. In addition, this beautiful white marble is also extracted locally in Taiwan. Since these are unique, they will not be an exact match as the images displayed.

The Marble Wrist rests are offered in four sizes! 60%, 65%, 65% Exploded, and TKL.

• 65%: 31.5cm long x 8cm large x 1.7cm thick // 12.4 x 3.15 x 0.63 inches.
• TKL: 36cm long x 8cm large x 1.7cm thick // 14.2 x 3.15 x 0.63 inches.

Each manufactured piece will have a unique look and will not be the same as the one on the photos above.

Marble is a material sensitive to acid corrosion. This piece of marble has been coated to improve the resistance to such damages, however, please, do not spread acid liquids or products on it such as fruit juices, food, detergents.

The marble has a thermal conductivity higher than wood but lower than metal. Therefore, if there is a big difference between your body temperature and the ambient temperature, the marble will cool down your wrist.

In conclusion, except if the ambient temperature is freezing cold, you will only have a pleasant cooling feeling, similar to a glass table or kitchen countertop.

The first purpose of a wrist rest is to elevate your wrists to the level of the keyboard.

For instance, as most mechanical keyboards are high (2 cm), if you keep typing a long time without wrist rest, your wrists will feel tired or even painful at the end of the day. Therefore, this wrist rest perfectly serves this purpose, however, it will not provide any cushioning. The cushioning will be the same as a wood or glass table.

Have you ever been bandaid modding and thought “this is pretty tedious”? We’ve got you covered! Thanks to the folks at Upgrade Keyboards, we’ve been provided with stabilizer pads that serve as a high-quality replacement for band-aid modding. With a custom mix of silicone and rubber for the pad, the stab pad has been developed to prevent bottom-out noise from stabilizers on the PCB as well as potential damage. Due to the materials used for the pads, they also provide a deep, muted tone in comparison to the loud clack sans-pad. 3M adhesive on the underside of the pad will prevent slippage as well!

Two variants are available for the pads:

• 0.2mm: best for clip-in PCB mount and those that want a harder bottom-out feeling
• 0.5mm: best for all other stabilizers, as some of the clip-in PCB mount stabilizers don’t anchor into the PCB strongly enough for the thicker pad

Each variant has its own attractive points to them: the 0.2mm will have a slightly lower tone than band-aids, and the 0.5mm are approximately 300% quieter (as per Upgrade Keyboards), with a considerably lower tone. Both pads will spring back slightly as to not result in a mushy feeling. They are also compatible with PCB- and plate-mount stabilizers, cut perfectly to size for both. Just make sure that if you previously had band-aids or stabilizers mounted on the PCB to clean off any potential lubricant, as this will cause the stab pad to slide.

TX springs have been kindly supplied by TX Keyboards, a Korean-based company that provides high-quality springs at an affordable price. Due to the quality control extent that TX Keyboards has gone through, these springs will not have a deviation outside of -1/+1 for spring weight.

They have provided a wide variety of spring weights; the force of these spring weights is measured at bottom-out. Differently-weighted springs will feel different depending on what type of switch they are put into, and it is important to understand that it can drastically change how the switch performs.

The difference in the spring length will affect the initial force for the keypress, but does not affect the bottom-out weight. So, the 16mm springs will have a higher initial weight than the 14mm springs, but the bottom-out weight will be the same on both.

TX switch films have been kindly supplied by TX Keyboards, a Korean-based company that provides high-quality polycarbonate films to improve the overall feeling of the switch. As the community continues to expand and switches continue to be developed, these films stay at the forefront of achieving the elusive endgame, wherever that may be.

These extremely thin polycarbonate films rest on the bottom housing of the switch during application.. When closed, they reduce the stem’s directional wobble and increase the tolerance of the two in combination while not increasing friction.

TX has slightly reworked their design by removing the bar that is towards the bottom of the film and instead has two short nubs. This simply makes it easier for the film to sit in the switch during application.

A thin variant has also been designed to fit Kailh switches, and is perfect for NovelKeys’ branded switches: Creams, Nolives, and the Dry/Silk series!

Introducing TX Stabilizers! Implementing a patented technology, kin25 of TX Keyboards has improved the design of Cherry clip-ins to minimize rattling and prevent wire pop-out (using stab stoppers included with the set). The patented design features a double shot stabilizer stem with a POM outside and TPU & POM mixture inside. This mixture helps to minimize wire rattle and bottom out noise. Revision 3 brings the new white colour as well as a 1.2mm variant to support the more uncommon PCB thickness.

TX Stabilizers are available in WK (1x 6.25u + 4x 2u stabilizers) or WKL (1x 7u + 4x 2u stabilizers) kits in the 1.6mm variant.

Introducing TX Stabilizers! Implementing a patented technology, kin25 of TX Keyboards has improved the design of Cherry clip-ins to minimize rattling and prevent wire pop-out (using stab stoppers included with the set). The patented design features a double shot stabilizer stem with a POM outside and TPU & POM mixture inside. This mixture helps to minimize wire rattle and bottom out noise. Revision 3 brought the new white colour as well as a 1.2mm variant to support the more uncommon PCB thickness, and Revision 4 has had multiple adjustments made to the stem housing as well as inclusion of the Long Pole (LP) variant best suited for switches with a long pole stem due to the earlier bottom-out than a standard length stem.

TX AP Stabilizers now combine both WK and WKL into one box by providing both a 6.25u and 7u spacebar wire!

Fresh from THOK Design come the truly thick Trinket Trays, 75mm wide trays ideal for storing various keyboard building accessories (screws, gaskets, keycaps, and more) with a deep tray centre and rubber feet to help prevent any of those precious parts going amiss! Available in full brass, weighing in at 400g, and titanium top with brass bottom weighing 250g.

Canada: You are here!
US: Kono
EU: CandyKeys
UK: ProtoTypist
SEA: iLUMKB
CN: zFrontier
OCE: THOK

You asked, Sandy delivered! The Peach Tray is back and better than ever!

Like its predecessor, The Peach Tray V2 is the perfect desktop accessory for holding all the small metal bits strewn over your desk. The aluminium tray features six small magnets within its base, evenly dispersing the magnetic force and keeping items atop it securely attached, even while upside-down!

Naturally, with a new version comes new improvements; The Peach Tray V2 features improved machining and anodization compared to the original, as well as two custom rubber feet to prevent the tray from sliding around on your desktop. The Peach Tray V2 is available in three cute colour options; the classic Peachy Rose Gold, the green-hued Mint Gray, and the Ashkeebs-exclusive Amethyst Purple!

Many people like to have as much of their build prepared in advance so that when their keyboard arrives all they have to do is tune their stabilisers, solder in their switches and assemble.

The Stabiliser Testing Station was designed so that you can lube and tune your stabilisers in preparation when your keyboard arrives. This is achieved by mimicking as close to the properties of an actual PCB as possible.

We have also included a handy unit sizing guide for quick verification of keycap sizes. This legend was scaled for standard Cherry keycaps, other profiles may vary slightly.

Designed in collaboration with Jels__

– 170mm x 80mm
– Standard 1.6mm thickness black core FR4 substrate
– Supports 6x 2u stabilizer and 1x 6.25u or 1x 7u stabilizer
– Standard Cherry keycap sizing guide (1u-2.75u)
– 4x Bumpons

Ever wondered what sort of brushes you’ll need when you are ready to start customising your switches?

The SK Lubricant Brush Kit is your answer. Each kit comes with 4 specialty-sized brushes that make lubing your switches a breeze. Because everyone is different, we’ve selected varying brushes depending on your preference and style.

What’s more, the pack also includes a specialised metallic stem holder to hold the stems while you lube them – ensuring no sticky fingers! (It can also double as a handy mechanical pencil when not in use – Please remove lead before using as a stem holder)

On the flip side, it has three handy holders to carry your 205, 3203 and even one designed for vials of 105. These hold tight and are very portable.

Each kit includes:

• Flat 0: The perfect all-in-one. Flat bristles tapered ends. This brush was cloned from an actual lube God and is regarded as the gold standard utility brush.
• Filbert 4: If you are looking for a bit more consistency and ease of use than a flat tip, this is for you.
• Round 1: This is the precision tip. Great for working around tactile legs or pole housings.
• Script Liner 1: An XL version of the Round to give a bit more depth inside the switch housing.
• SK Stem holder: 4 prongs emerge to secure your stems while you lube them. Button operated.

The RAMA WORKS® Switchpuller XO is a must have in every mechanical keyboard enthusiasts tool-kit. This switchpuller is designed to safely remove a switch from a hotswap board or from a plate (just make sure the switches are desoldered).

The Switchpuller XO SEQ2 is now thicker to improve rigidity while still removing switches with ease and precision. Now featured in the SOYA colourway with a textured matte finish, classic laser-etched product code, and relocated X and O cutouts.