Following the interest and success of the Freebird60 keyboard, and having noticed the dearth of affordable and quality TKL boards in the market, KeebsForAll has decided to expand the Freebird product line with the Freebird TKL!
There are a variety of extra parts available for the Freebird TKL keyboard, including a variety of plates, spare Hot-Swap PCBs, dampeners, and universal TKL carrying cases!
Check out the Freebird numpads on offer!
Check out the Freebird TKL keyboards on offer!
Review
Typing Test
Following the interest in and success of the Freebird60 keyboard, KeebsForAll has decided to expand the Freebird product line with the Freebird Numpad Lite and the Freebird Numpad Pro!
Like the Freebird60 and the Freebird TKL, both Freebird Numpads feature an aluminium case available in four E-coated colours! The Lite numpad is slope-matched to the Freebird60, whereas the Pro numpad features an extra top row, and is slope-matched to the Freebird TKL.
Check out the Freebird TKL keyboard on offer!
Check out the extra parts on offer for the Freebird TKL!
PLEASE NOTE: The colour of the finished Olive and Navy Freebird Numpads does not exactly match the colour shown in the renders. Please refer to the below photographs when considering your selection.
The first wave of Nazaré 1-60 has finally arrived! Designed by Invezting, longtime community member and founder of Nazaré Engineering, the Nazaré 1-60 has been meticulously crafted to offer a unique look, sound, and feel.
Nazaré 1-60‘s case is made of machined aluminium and features a symmetrical bezel designed to compliment its low front height and provide a clean top-view, as well as a distinctive aluminium blocker badge adorning its bottom right corner. The case bottom bears a novel design; with copper and brass weights representing the sun and moon respectively, and an ocean blue polycarbonate insert betwixt that evokes the waves their immense gravity make on Earth. Nazaré 1-60 also features a custom “rail-ring” mounting system that uses eight gummy O-rings to completely isolate the plate from the case, fitting snugly into the case’s machined grooves (or “rails”) while preserving the keyboard’s sleek form factor.
Typing Test
Designed to honour the materials used in its construction, Chapter 1 shows off the parts that make up the board in a sophisticated and striking fashion. Mix and match plates, knobs, and weights to create the board of your dreams, with hundreds of possible combinations! All Chapter 1 boards come with a shell case and a promotional comic book, and several deskmats that match the comic’s style are available for purchase!
Chapter 1 features an engraved single-piece weight that spans the width of the keyboard, creating an amazing typing sound that only gets better with higher density weight material like brass, copper, or steel! Each Chapter 1 case also comes with an encoder knob that matches the material and colour of the chosen kit, with alternate colours and materials available for seperate purchase!
Finally, the Chapter 1‘s leaf spring plate was designed to achieve a bouncier, softer typing feel that is perfectly realized in the polycarb and aluminum plates, with the brass and copper plates providing a more rigid option for those who prefer a more traditional typing experience!
Want to personalize your Chapter 1 or pick up a deskmat? Head over to the parts page!
Typing Test
Vendors
Canada: You are here!
US: Mekibo
EU: MyKeyboard
AU: DailyClack
SEA: iLumKB
CN: zFrontier
Group Buy Information
As this is a Group Buy there are no refunds available once the GB has closed. Please make sure you consider this before joining. This a pre-order for this keyboard. This keyboard will be manufactured after the GB period. If you join this GB, you’ll receive the keyboard after production is completed in approximately Q3 2023. Please do not add in-stock items, or items from other group buys to this order. All in-stock items added to orders will be cancelled from that order and refunded. Any orders with different group buy projects combined will be cancelled and refunded. By purchasing this product, you are agreeing to these terms.
The first wave of Nazaré 1-60 has finally arrived! Designed by Invezting, longtime community member and founder of Nazaré Engineering, the Nazaré 1-60 has been meticulously crafted to offer a unique look, sound, and feel.
Nazaré 1-60‘s case is made of machined aluminium and features a symmetrical bezel designed to compliment its low front height and provide a clean top-view, as well as a distinctive aluminium blocker badge adorning its bottom right corner. The case bottom bears a novel design; with copper and brass weights representing the sun and moon respectively, and an ocean blue polycarbonate insert betwixt that evokes the waves their immense gravity make on Earth. Nazaré 1-60 also features a custom “rail-ring” mounting system that uses eight gummy O-rings to completely isolate the plate from the case, fitting snugly into the case’s machined grooves (or “rails”) while preserving the keyboard’s sleek form factor.
Typing Test
Featuring a sandblasted CNC machined aluminum case and a double-gasket mounting system designed to reduce ping and improve typing sound, the Keychron Q1 is a board designed to be seen, felt, and heard.
The Keychron Q1 is fully-featured, with a programmable encoder knob, an integrated low-power-consumption ARM processor, and a switch to facilitate multiple keyboard layouts. Finish the build with any MX-style switch and your favourite caps, then personalize the keymaps with VIA to make the Q1 truly yours.
Want to learn how to use VIA with your Q1?
Check out Keychron’s helpful tutorial!Already a VIA user?
Get the Q1 JSON profile here!Review
BadSeed
Featuring a sandblasted CNC machined aluminum case and a double-gasket mounting system designed to reduce ping and improve typing sound, the Keychron Q2 is a board designed to be seen, felt, and heard.
The Keychron Q2 is fully-featured, with a programmable encoder knob, an integrated low-power-consumption ARM processor, and a switch to facilitate multiple keyboard layouts. Finish the build with any MX-style switch and your favourite caps, then personalize the keymaps with VIA to make the Q2 truly yours.
Want to learn how to use VIA with your Q2?
Check out Keychron’s helpful tutorial!Already a VIA user?
Get the Q2 (w/knob) JSON file here!
Get the Q2 (knobless) JSON file here!Review
BadSeed
Meet the QK65, the first keyboard from QwertyKeys. The QK65’s body has been designed from the ground up to provide great value without sacrificing aesthetic or acoustic quality, featuring a CNC-machined aluminum top case with anodized or electrophoretic finish, a PVD-coated stamped steel plate, a die-cast aluminum bottom case, and a large molded silicone dampener that comfortably fills the space between.
Extra plates and PCBs are available for the QK65; choose from a solderable or hot-swappable ANSI PCB, or a plate made of your choice of aluminum, FR-4, polycarbonate, or POM. All PCB and plate variations have unique flex cuts, and each PCB includes two pieces of case foam, allowing the QK65 to provide a wide range of user-defined typing experiences.
Be sure to pick up a QK65 keyboard over on the main page!
Community Reviews
Designed to honour the materials used in its construction, Chapter 1 shows off the parts that make up the board in a sophisticated and striking fashion. Mix and match plates, knobs, and weights to create the board of your dreams, with hundreds of possible combinations! All Chapter 1 boards come with a shell case and a promotional comic book, and several deskmats that match the comic’s style are available for purchase!
Chapter 1 features an engraved single-piece weight that spans the width of the keyboard, creating an amazing typing sound that only gets better with higher density weight material like brass, copper, or steel! Each Chapter 1 case also comes with an encoder knob that matches the material and colour of the chosen kit, with alternate colours and materials available for separate purchase!
Finally, the Chapter 1‘s leaf spring plate was designed to achieve a bouncier, softer typing feel that is perfectly realized in the polycarb and aluminum plates, with the brass and copper plates providing a more rigid option for those who prefer a more traditional typing experience!
Pick up a Chapter 1 keyboard over on the main page!
Typing Test
Vendors
Canada: You are here!
US: Mekibo
EU: MyKeyboard
AU: DailyClack
SEA: iLumKB
CN: zFrontier
Group Buy Information
As this is a Group Buy there are no refunds available once the GB has closed. Please make sure you consider this before joining. This a pre-order for these parts. These parts will be manufactured after the GB period. If you join this GB, you’ll receive the parts after production is completed in approximately Q3 2023. Please do not add in-stock items, or items from other group buys to this order. All in-stock items added to orders will be cancelled from that order and refunded. Any orders with different group buy projects combined will be cancelled and refunded. By purchasing this product, you are agreeing to these terms.
The QK65 R2 shares much of its predecessors design, providing great value without sacrificing aesthetic or acoustic quality, and features a CNC-machined aluminum top case with anodized, coated, or electrophoretic finish, a PVD-coated stamped steel plate, a die-cast aluminum bottom case, and a large molded silicone dampener that comfortably fills the space between.
Don’t forget to pick up a plate and a PCB on the parts page!
PCB Layouts
Hotswap
Solderable
Group Buy Information
As this is a Group Buy there are no refunds available once the GB has closed. Please make sure you consider this before joining. This a pre-order for this keyboard. This set will be manufactured after the GB period. If you join this GB, you’ll receive the keyboard after production is completed in approximately Q4 2022. Please do not add in-stock items, or items from other group buys to this order. All in-stock items added to orders will be cancelled from that order and refunded. Any orders with different group buy projects combined will be cancelled and refunded. By purchasing this product, you are agreeing to these terms.
The QK65 R2 shares much of its predecessors design, providing great value without sacrificing aesthetic or acoustic quality, and features a CNC-machined aluminum top case with anodized, coated, or electrophoretic finish, a PVD-coated stamped steel plate, a die-cast aluminum bottom case, and a large molded silicone dampener that comfortably fills the space between.
Choose from a solderable or hot-swappable ANSI PCB, and a plate made of your choice of aluminum, FR-4, polycarbonate, or POM. All PCB and plate variations have unique flex cuts, and each PCB includes two pieces of case foam, allowing the QK65 to provide a wide range of user-defined typing experiences.
Be sure to pick up a QK65 R2 keyboard over on the main page!
PCB Layouts
Hotswap
Solderable
Group Buy Information
As this is a Group Buy there are no refunds available once the GB has closed. Please make sure you consider this before joining. This a pre-order for this keyboard. This set will be manufactured after the GB period. If you join this GB, you’ll receive the keyboard after production is completed in approximately Q4 2022. Please do not add in-stock items, or items from other group buys to this order. All in-stock items added to orders will be cancelled from that order and refunded. Any orders with different group buy projects combined will be cancelled and refunded. By purchasing this product, you are agreeing to these terms.
Based on the open-source design of the Bakeneko65, the Block-67 R2 makes a few key improvements over its progenitor. Notably, the internal dimensions of the board have been tweaked for better acoustics, the PCB has been changed to a multi-layout hotswap, and the front height has been adjusted to 17mm, complimenting the uniform 7mm bezel and giving the keyboard its titular blocky appearance.
A variety of spare parts are available for the Block-67, including plates, o-rings, PCBs, daughterboards, and case foam. Available materials for spare plates are Brass, FR-4, Polycarb, and POM, and the o-rings come in two durometers; the 55A o-ring is the default mount used by the Block67, whereas the 30A o-ring is softer, and contributes a bouncier typing feel to the board.
Here are our ongoing deals - Buy two deskmats, get the third free!20% off when combining GMK Night Runner R2 base kit with matching Stellar65!Major discounts on Salvation case & parts!Keychrons & Skyloongs 40% discounted!
